Allied-telesis AT-FS217 Instrukcja Użytkownika Pobierz pdf (Strona 19)

Chapter 2

Installing the Switch

Verifying the Package Contents

Make sure the following items are included in your package. If any item is

missing or damaged, contact your Allied Telesyn sales representative for

assistance.

❑ One AT-FS21x or AT-FS212/x Series Series Fast Ethernet Switch

❑ External power adapter (North America, Continental Europe, or

United Kingdom)

❑ 2 Phillips-head screws

❑ 2 plastic anchors

❑ Cable tie

❑ This installation guide

❑ Warranty card

Planning the Installation

Be sure to observe the following guidelines when planning the installation of

your switch.

❑ The end-node connected to the fiber optic port on the switch must be

able to operate at 100 Mbps and full-duplex mode.

❑ The end-node connected to the twisted pair port can operate at either

10 Mbps or 100 Mbps, half- or full-duplex mode.

❑ The twisted pair cabling must be kept away from sources of electrical

noise, such as radios, transmitters, power lines, broadband amplifiers,

electrical motor, and fluorescent fixtures.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Brak uwag

Allied-telesis AT-FS217 Instrukcja Użytkownika Strona 19