Allied-telesis AT-SBx3106WMB Instrukcja Użytkownika Pobierz pdf (Strona 31)

AT-SBx3106WMB Wall Mounting Brackets Installation Guide

Wallboard To install the four 2 1/2” wood screws, perform the following procedure:

1. Use a drill and 3/16” drill bit to pre-drill the four screw holes you

marked on the wall in the previous section.

2. Use a 3/8” socket or wrench to install the screws at the points you

marked on the wall. Do not install the screws flush with the wall. They

should extend 1.25 cm (1/2 in.) from the wall. Refer to Figure 12 on

page 30.

3. Go to “Installing the Brackets on the Chassis” on page 32.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Brak uwag

Allied-telesis AT-SBx3106WMB Instrukcja Użytkownika Strona 31