Allied-telesis AlliedView-EMS 4.0.3 Device-Management Instrukcja Użytkownika Strona 376

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 468
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 375
AlliedView™-EMS 4.0.3 Device Management Guide Page 376 of 468
Bandwidth Limits
Displays bandwidth limits of the switch ports.
Note - The current firmware version does not allow the Ingress Limit
parameter to be configured.
Error Statistics
Displays error statistics.
Note - The following parameters are not applicable to the AT-x900-24X series and
should be ignored:
Ethernet Chip Set
Symbol Errors
Duplex Status
Rate Control Ability
Rate Control Status
Spanning Tree Info
Displays the port's spanning tree parameters.
Note - The Path Cost Contribution parameter is not applicable to the AT-x900-24X
series and should be ignored.
Note - Valid MIB Set values for the Port Path Cost parameter is in the range [1-
65535] inclusive.
MAU Info
Displays interface-related MAU information for the port.
Note - The MAU Type List Bits and HC False Carriers parameters are not applicable
to the AT-x900-24X series and should be ignored.
Note - The MAU Status and Default MAU Type parameters are implemented as
'read-only'.
MAU Negotiation Info
Displays the MAU's auto-negotiation settings and its status.
Note - The following parameters are not applicable to the AT-x900-24X series and
should be ignored:
Capability Bits
Advertised Bits
Received Bits
Remote Fault Advertised
Remote Fault Received
Przeglądanie stron 375
1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 467 468

Komentarze do niniejszej Instrukcji

Brak uwag