Allied-telesis AR700 SERIES Software Release 2.7.1 Instrukcja Użytkownika Pobierz pdf (Strona 88)

88 AR700 Series Router User Guide

Software Release 2.7.1

C613-02047-00 REV A

Before You Start

1. Ensure that the routers you want to configure are connected as described in

the Installation and Safety Guide.

2. Connect a terminal to the console port (port 0) on each router as described

in the Installation and Safety Guide. Alternatively, you can connect a PC to the

console port and use a terminal emulation program like Windows™

Ter minal.

3. Login to the MANAGER account on each router (see “Logging In” on

page 15).

Configuring IP

This example (Figure 13 on page 88) illustrates the steps required to configure

TCP/IP using the router’s command line interface. Two routers running TCP/

IP will be connected together using the Point-to-Point Protocol (PPP) over a

wide area link.

Figure 13: Example configuration for an IP network.

172.16.254.1

172.16.254.2

192.168.31.16

172.16.8.0

192.168.31.30

172.16.8.33

PPP Data Link

UGIP1_R

Head Office Router Remote Office Router

Table 11: Example configuration parameters for an IP network .

Parameter Head Office Router Remote Office Router

Eth interface eth0 eth0

Eth interface IP address 172.16.8.33 192.168.31.30

Eth IP subnet address 172.16.8.0 192.168.31.16

Eth LAN IP subnet mask 255.255.255.0 255.255.255.240

PPP interface ppp0 ppp0

PPP interface IP address 172.16.254.1 172.16.254.2

PPP interface IP subnet address 172.16.254.0 172.16.254.1

PPP interface IP subnet mask 255.255.255.0 255.255.255.0

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 117 118

Brak uwag

Allied-telesis AR700 SERIES Software Release 2.7.1 Instrukcja Użytkownika Strona 88