Allied-telesis AT-MR820T Instrukcja Użytkownika Pobierz pdf (Strona 29)

AT-MR420T and AT-MR820T Installation Guide

Attach a second 10Base-T UTP RJ45 connector to 10Base-T network

port 2. The Port 2 LINK OK LED on the front panel should now light,

provided the 10Base-T device on the opposite end of the UTP cable is

operational.

AUI Network Port

Each repeater has one AUI port to accommodate a 10Base5 (standard

or thick Ethernet cable) connection to the network backbone using an

AUI.

LED Status Indicators

The front panel indicators are grouped into the following categories:

❑ Network Load

❑ Port Status

❑ Hub Status

Network Load Indicators

Eight Network Load LEDs indicate the percentage of network

utilization. Figure 4 shows these LEDs.

Figure 4: Network Load Indicators

MRx20T(UTP)Ver6_Book Page 7 Thursday, April 3, 1997 5:18 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 65 66

Brak uwag

Allied-telesis AT-MR820T Instrukcja Użytkownika Strona 29