Allied-telesis AT-S25 Instrukcja Użytkownika Pobierz pdf (Strona 54)

5. Immediately press any key when you see the following prompt:

Hit any key to run diagnostics or to reload

system software.

A menu is displayed.

6. Select D from the menu. The following warning message displays:

WARNING: This will erase all current

configuration data!

Continue? Y/N

7. Type Y for yes.

The system displays the following prompt:

All configuration data has been reset to

factory default values.

8. Type B to boot the stack software.

The master switch will reset itself and run a series of self-tests,

which take a few seconds to complete. During the tests, the Fault

LED on the front of the switch will flash. Once the tests are

completed, the Fault LED will remain OFF.

The master switch begins a discovery process of the stack

topology, during which the number and types of switches that

constitute the stack are determined. This discovery process takes

approximately thirty seconds to complete. Once completed, the

stack will begin to forward packets.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 165 166

Brak uwag

Allied-telesis AT-S25 Instrukcja Użytkownika Strona 54