Allied-telesis SwitchBlade 4000 Series Switch Hardware Reference Instrukcja Użytkownika Pobierz pdf (Strona 15)

Hardware Reference 15

C613-03060-00 REV H

add vlan="v2" port=2.1-2.4

# vlan swapped out configuration

add vlan="v2" port=1.1-1.8

After the new line card is inserted and the create config command is

entered, the show config dynamic command displays the following

configuration:

# vlan configuration

add vlan="v2" port=2.1-2.4

7. (continuing from the end of Example 4) The wrong line card is accidentally

inserted into slot 1. The user realises the mistake and removes the line card.

The user has also already made further configuration changes, and saves

the configuration by using the command:

create config

Because the line card that was inserted by accident has been hot swapped,

creating a configuration removes the commands stored in the swapped-out

configuration. When the correct line card is inserted, it is initialised without

configuration.

To avoid loss of the swapped-out configuration in this situation, insert the

correct line card, and restart the SwitchBlade. Then make the other

configuration changes and create the configuration.

Physical and Operating Specifications

This section provides an overview of the SwitchBlade’s physical and operating

specifications.

AT-SB4108 SwitchBlade 8 Card Chassis

Dimensions

• Height: 666 mm (15U rack occupancy)

• Width: 440 mm (excluding rack-mounting brackets). Suitable for 19

inch racks

• Depth: 392.5 mm (539 mm if a cable manager is attached)

• Chassis 8 weight: 19 kg (empty chassis)

• Chassis 8 loaded Weight: 34 to 63.5 kg (depending on the configuration)

Environmental Conditions

• Operating temperature range: 0 to 40º C (32 to 104º F)

• Storage temperature range: -25 to 70º C (-13 to 158º F)

• Relative humidity range: 5 to 95% non-condensing

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

Brak uwag

Allied-telesis SwitchBlade 4000 Series Switch Hardware Reference Instrukcja Użytkownika Strona 15