Allied Telesis AT-EN646 Instrukcja Użytkownika Pobierz pdf (Strona 54)

Chapter 4: Installing the Gateway Outdoors

54 Section I: Outdoor Installation

Required Tools and Supplies

The following tools and supplies are required to install the gateway:

Tools Have the following tools on hand before you install the enclosure or

gateway:

 Flat head and #2 Phillips screwdrivers

 Wire cutters

 Crimping tool

Additional

Supplies

You may also need the following supplies:

 Silicone sealant

 Electrical tape

 Two UV-rated wire ties

 Console cable (AT-RGCONSOLECABLE)

 Power cable (AT-RG013-00)

 Power supply (AT-iMG005G)

 Fiber cleaning materials (see Appendix B, “Cleaning Fiber Optic

Connectors” on page 91)

You will need the following items to create a ground wire for the DC

terminal block:

 One piece of #18 AWG stranded wire, 5-1/2-6 inches (140mm-

150mm) long, green with a yellow stripe

 A 16-22 AWG #10 ring lug with a green insulation jacket

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 97 98

Brak uwag

Allied Telesis AT-EN646 Instrukcja Użytkownika Strona 54