Allied Telesis Switch AT-9000/28 Instrukcja Użytkownika Pobierz pdf (Strona 182)

Chapter 16: Setting 802.1x Port-based Network Access

182

 Host Mode— Sets the operating modes on authenticator ports.

Choose from the following:

Single-host Specifies the single operating mode. An

authenticator port set to this mode

forwards only those packets from the one

client who initially logs on. This is the

default setting.

Multi-host Specifies the multiple host operating

mode. An authenticator port set to this

mode forwards all packets after one client

logs on. This is referred to as piggy-

backing.

Multi-supplicant Specifies the multiple supplicant operating

mode. An authenticator port set to this

mode requires that all clients log on.

 Mac Authentication— Activates MAC address-based

authentication on authenticator ports. An authenticator port that

uses this type of authentication extracts the source MAC address

from the initial frames from a supplicant and automatically sends it

as the supplicant’s user name and password to the authentication

server. This authentication method does not require 802.1x client

software on supplicant nodes. Click the box to activate this field.

 Re-Auth Learning— Forces ports that are using MAC address

authentication into the unauthorized state. You may use this

setting to reauthenticate the nodes on authenticator ports. Click

the box to activate this field.

6. Click Apply.

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 247 248

Brak uwag

Allied Telesis Switch AT-9000/28 Instrukcja Użytkownika Strona 182