Allied-telesis AT-FS724 Instrukcja Użytkownika Pobierz pdf (Strona 35)

$70)6:4;#DQG#$70)6:57#,QVWDOODWLRQ#*XLGH

2-15

3RUW

&RQILJXUDWLRQ

'HIDXOWV#DQG

'HVFULSWLRQV

The AT-FS724 has 24 station ports. The AT-FS718 has 16 station ports

and two uplinks with the following port numbering:

❑

Ports 1 through 16 = station ports

❑

Port 18 = uplink port A

❑

Port 19 = uplink port B

The switch’s port configurations are set to the following defaults:

❑

Status

- Ports enabled

❑

Link

- Offline until there is a valid physical link to a device

❑

Transmit Mode

- Auto-negotiating for speed and duplex

transmission

❑

Switching Mode

- Store-and-forward

❑

Port Name

- No name assigned

Enable or disable the port

Ports are enabled as a default. In case of a network problem, you may

want to disable a port to prevent problem packets from being

forwarded. Once the problem is fixed, you may enable the port again

to resume normal operation. You can also disable an unused port to

secure it from unauthorized connections.

Transmission mode

The 10Base-T/100Base-TX ports auto-negotiate as a default, while FX

ports are fixed at 100 Mbps. Depending upon what the connected

device supports, you may configure each switch port as follows:

Auto-negotiating:

The port determines the connected device’s

configuration, 10 Mbps or 100 Mbps speed, full- or half-

duplex, and adapts automatically. This setting provides

flexibility so that you need not reconfigure the switch if you

change the type of device you are connecting to the port. If

you disable

Auto-negotiate

by selecting

Full-duplex

Half-duplex

, you can also select

Hundred Base

(100BaseTX)

for 100 Mbps or

Ten Base (10BaseTX)

for 10 Mbps operation.

Full-duplex:

You may use this setting if the connected device

supports full-duplex; that is, transmit and receive

communications happen simultaneously.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-FS724 Instrukcja Użytkownika Strona 35

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-FS724