Allied-telesis AT-FS970M Series Instrukcja Użytkownika Pobierz pdf (Strona 60)

Chapter 1: AlliedWare Plus Command Line Interface

Moving Down the Hierarchy

To move down the mode hierarchy, you have to step through each mode

in sequence. Skipping modes is not permitted.

Each mode has a different command. For instance, to move from the User

Exec mode to the Privileged Exec mode, you use the ENABLE command.

Some commands, like the INTERFACE PORT command, which is used to

enter the Port Interface mode, require a value, such as a port number, a

VLAN ID or a port trunk ID.

ENABLE

Command

You use this command to move from the User Exec mode to the

Privileged Exec mode. The format of the command is:

enable

Figure 2. ENABLE Command

CONFIGURE

TERMINAL

Command

You use this command to move from the Privileged Exec mode to the

Global Configuration mode. The format of the command is:

configure terminal

Figure 3. CONFIGURE TERMINAL Command

CLASS-MAP

Command

You use this command to move from the Global Configuration mode to the

Class-Map mode, in which you create classifiers and flow groups for

Quality of Service policies. The format of the command is:

class-map

id_number

Figure 4. CLASS-MAP Command

awplus> enable

awplus#

awplus> enable

awplus# configure terminal

awplus(config)#

awplus(config)# class-map 256

awplus(config-cmap)#

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 192 193

Brak uwag

Allied-telesis AT-FS970M Series Instrukcja Użytkownika Strona 60