Allied-telesis AT-IFS802SP/POE Instrukcja Użytkownika Strona 82

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 105
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 81
78 AT-IFS802SP/POE(W)-80 User Manual
RJ-45 Pin Assignments of POE
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for
receiving data; pins 4, 5, 7 and 8 are used for power supplying.
Pin Signal
1 RX+
2 RX-
3 TX+
4 VCC -
5 VCC -
6 TX-
7 VCC +
8 VCC +
Pin out of Cisco non-802.3af standard PD•
Pin Signal / Name
1 RX+
2 RX-
3 TX+
4 VCC+
5 VCC+
6 TX-
7 VCC-
8 VCC-
Pin out of PoE Midspan Hub/Switch•
Pin Signal / Name
1 TX+/VCC+
2 TX-/VCC+
3 TX+/VCC-
4
5
6 TX-/VCC-
7
8
Pin out of PoE Endspan Hub/Switch•
[note]
‘+’and‘-‘signsrepresentthepolarityofthewiresthatmakeupeachwirepair.
Before you power PD, please check the RJ-45 connector pin assignment follow
IEEE802.3af standard; otherwise you may need to change one of the RJ-45
connector pin assignment attached with the UTP cable.
Przeglądanie stron 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 104 105

Komentarze do niniejszej Instrukcji

Brak uwag