
Managing a Switch
56
Configuring the RS232 Port
The default settings for the RS232 port on the front panel of the Ethernet
switch are as follows:
❑ Baud rate: 9600
❑ Data bits: 8
❑ Parity: None
❑ Stop bits: 1
❑ Flow control: None
To change the settings for the RS232 port, perform the following
procedure:
1. From the Omega Main Menu, select System Configuration.
The System Configuration menu in Figure 8 on page 41 is displayed.
2. From the System Configuration menu, select Terminal Configuration.
The Terminal Configuration window in Figure 20 is displayed.
Figure 20 Terminal Configuration Window
Komentarze do niniejszej Instrukcji