Allied Telesis AT-iMG7x6MOD series Instrukcja Instalacji Pobierz pdf (Strona 32)

AT-iMG646MOD Installation Guide

32 Chapter 4: Installing the Gateway Indoors

Connecting the Ground Wire

To connect the ground wire, perform the following procedure:

1. Prepare an adequate length of 14AWG stranded grounding wire for the ground connection.

2. Strip 0.25 in.(0.7 cm) of insulation from the ground wire and crimp it into the ground wire ring lug.

3. Secure the ring lug on the stud with a washer and #8-32 Kepnut, as shown in Figure 21.

Figure 21. Securing the Ground Wire Lug

4. Trim and connect the other end of the ground wire to any ground point according to National Electrical

Codes.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Brak uwag

Allied Telesis AT-iMG7x6MOD series Instrukcja Instalacji Strona 32