Allied-telesis AT-S25 Instrukcja Użytkownika Pobierz pdf (Strona 38)

Section II: Local and Telnet Mangement

Selecting a

Switch Module

in the Stack

Most of the procedures in this guide have you select the switch module

in the stack on which you want to perform the procedure.

For example, to display the status of the ports on the third switch

module, you would perform the following procedure:

1. From the Main Menu, type M to select M - Select another module.

The prompt message is displayed:

Select Module ID: [1 to 8] ->

2. Enter 3 for the switch module ID, and press the Enter key.

Note

The number of each switch module in the menu corresponds to the

Stack ID setting on the switch. The Stack ID setting is assigned with

the Stack ID switch on the back panel of the switch.

For the location of the switch and information on how each switch

is assigned a value, refer to the AT-8316F/MT, AT-8316F/VF, AT-

8316F/SC and AT-8324 Installation Guide.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 276 277

Brak uwag

Allied-telesis AT-S25 Instrukcja Użytkownika Strona 38