Allied-telesis AT-S95 CLI Instrukcja Użytkownika Pobierz pdf (Strona 113)

Ethernet Configuration Commands

Page 101

The following example enables Broadcast storm control on port 1/g5 for aGE devices.

The following example enables Broadcast storm control on port 1/g5.

port storm-control broadcast rate

The port storm-control broadcast rate Interface Configuration (Ethernet) mode command configures the

maximum Broadcast rate. Use the no form of this command to return to the default configuration.

Syntax

port storm-control broadcast rate rate

no port storm-control broadcast rate

Parameters

•

rate — Maximum kilobits per second of Broadcast and Multicast traffic on a port. Possible values are in a

range of 3500-1000000.

For FE ports, possible values are 70K - 100M.

For GE ports, possible values are in a range of 3500-1000000.

Default Configuration

For FE ports, the default storm control Broadcast rate is 3500Kbits/Sec.

For GE ports, the default storm control Broadcast rate is 12,000 Kbits/Sec.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

Use the port storm-control broadcast enable Interface Configuration mode command to enable Broadcast

storm control.

For FE ports, the software displays the actual rate since granularity depends on the requested rate.

For GE ports, the rate is rounded off to the nearest 64 Kbits/Sec (except for 1-63 Kbits/Sec which is rounded off to

64 Kbits/Sec). If the rate is 0, Broadcast packets are not forwarded.

Console(config)#

interface ethernet 1/g5

Console(config)#

port storm-control broadcast enable

Console(config)# interface ethernet 1/g5

Console(config)# port storm-control broadcast enable

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 347 348

Brak uwag

Allied-telesis AT-S95 CLI Instrukcja Użytkownika Strona 113