Allied-telesis AT-S95 CLI Instrukcja Użytkownika Pobierz pdf (Strona 144)

100

101

Page 132

Not approved by Document Control. For review only.

Allied Telesis

Command Line Interface User’s Guide

Default Configuration

The default speed is 9600 bps.

Command Mode

Line Configuration (console) mode

User Guidelines

This command is available only on the line console.

The configured speed is applied when Autobaud is disabled. This configuration applies only to the current

session.

Example

The following example configures the line baud rate to 115200.

autobaud

The autobaud Line Configuration mode command sets the line for automatic baud rate detection (autobaud). Use

the no form of this command to disable automatic baud rate detection.

Syntax

autobaud

no autobaud

Default Configuration

Autobaud is disabled.

Command Mode

Line Configuration (console) mode

User Guidelines

This command is available only on the line console.

To start communication using Autobaud , press <Enter> twice. This configuration applies only to the current

session.

Example

The following example enables autobaud.

Console(config)#

line console

Console(config-line)#

speed

115200

Console(config)#

line console

Console(config-line)#

autobaud

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 347 348

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-S95 CLI Instrukcja Użytkownika Strona 144

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-S95 CLI