Allied-telesis AT-S95 CLI (AT-8000GS Series) Instrukcja Użytkownika Pobierz pdf (Strona 160)

100

101

Page 160

Allied Telesis

AT-8000GS Command Line Interface User’s Guide

Default Configuration

The default speed is 115200 bps.

Command Mode

Line Configuration (console) mode

User Guidelines

This command is available only on the line console.

The configured speed is applied when Autobaud is disabled. This configuration applies only to the current

session.

Example

The following example configures the line baud rate to 9600.

autobaud

The autobaud Line Configuration mode command sets the line for automatic baud rate detection (autobaud). Use

the no form of this command to disable automatic baud rate detection.

Syntax

autobaud

no autobaud

Parameters

This command has no arguments or keywords.

Default Configuration

Autobaud is disabled.

Command Mode

Line Configuration (console) mode

User Guidelines

This command is available only on the line console.

To start communication using Autobaud , press <Enter> twice. This configuration applies only to the current

session.

Example

The following example enables autobaud.

console(config)#

line console

console(config-line)#

speed

9600

console(config)#

line console

console(config-line)#

autobaud

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 396 397

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-S95 CLI (AT-8000GS Series) Instrukcja Użytkownika Strona 160

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-S95 CLI (AT-8000GS Series)