Allied-telesis AT-S95 CLI (AT-8000GS Series) Instrukcja Użytkownika Pobierz pdf (Strona 352)

100

101

Page 352

Allied Telesis

AT-8000GS Command Line Interface User’s Guide

Example

The following example configures the PVID for Ethernet port 1/g16, when the interface is in general mode.

switchport general ingress-filtering disable

The switchport general ingress-filtering disable Interface Configuration mode command disables the ingress

filtering of a port. Use the no form of this command to enable the ingress filtering of a port.

Syntax

switchport general ingress-filtering disable

no switchport general ingress-filtering disable

Parameters

This command has no arguments or keywords.

Default Configuration

Ingress filtering is enabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example disables the ingress filtering of a port.

switchport general acceptable-frame-type tagged-only

The switchport general acceptable-frame-type tagged-only Interface Configuration mode command discards

untagged frames at ingress. Use the no form of this command to return to the default configuration.

Syntax

switchport general acceptable-frame-type tagged-only

no switchport general acceptable-frame-type tagged-only

Parameters

This command has no arguments or keywords.

Default Configuration

All frame types are accepted at ingress.

console(config)# interface ethernet 1/g16

console(config-if)# switchport general pvid 234

console(config)# switchport general ingress-filtering disable

1 2 ... 347 348 349 350 351 352 353 354 355 356 357 ... 396 397

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-S95 CLI (AT-8000GS Series) Instrukcja Użytkownika Strona 352

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-S95 CLI (AT-8000GS Series)