Allied-telesis AT-S95 CLI (AT-8000GS Series) Instrukcja Użytkownika Pobierz pdf (Strona 263)

100

101

Spanning-Tree Commands

Page 263

Parameters

This command has no arguments or keywords.

Default Configuration

Spanning tree is enabled on all ports.

Command Modes

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example disables spanning-tree on Ethernet port 1/g16.

spanning-tree cost

The spanning-tree cost Interface Configuration mode command configures the spanning tree path cost for a

port. Use the no form of this command to return to the default configuration.

Syntax

spanning-tree cost cost

no spanning-tree cost

Parameters

•

cost — Path cost of the port (Range: 1 - 200,000,000)

Default Configuration

Default path cost is determined by port speed and path cost method (long or short) as shown below:

Command Modes

Interface Configuration (Ethernet, port-channel) mode

console(config)# interface ethernet 1/g16

console(config-if)# spanning-tree disable

Interface Long Short

Port-channel 20,000 4

Gigabit Ethernet (1000 Mbps) 20,000 4

Fast Ethernet (100 Mbps) 200,000 19

Ethernet (10 Mbps) 2,000,000 100

1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 396 397

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-S95 CLI (AT-8000GS Series) Instrukcja Użytkownika Strona 263

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-S95 CLI (AT-8000GS Series)