Allied-telesis AT-S95 CLI (AT-8000GS Series) Instrukcja Użytkownika Pobierz pdf (Strona 178)

100

101

Page 178

Allied Telesis

AT-8000GS Command Line Interface User’s Guide

Syntax

lldp optional-tlv tlv1 [tlv2 … tlv5]

no lldp optional-tlv

Parameters

•

tlv — Specifies the TLV that should be included. Available optional TLVs are: port-desc, sys-name,

sys-desc, sys-cap and 802.3-mac-phy.

Default Configuration

No optional TLV is transmitted.

Command Mode

Interface Configuration (Ethernet) mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example specifies which optional TLV (2)s from the basic set should be transmitted.

lldp management-address

The lldp management-address Interface Configuration mode command specifies the management address that

is advertised from an interface. Use the no form of this command to revert to the default setting.

Syntax

lldp management-address {ip-address | none}

no management-address

Parameters

•

ip-address — Specifies the management address to advertise.

• none — Specifies not to advertise any address.

Default Configuration

No IP address is advertised.

Command Mode

Interface Configuration (Ethernet) mode.

User Guidelines

•

Each port can advertise one IP address.

• Only static IP addresss can be advertised.

console(config)# interface ethernet g5

console(config-if)# lldp optional-tlv sys-name

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 396 397

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-S95 CLI (AT-8000GS Series) Instrukcja Użytkownika Strona 178

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-S95 CLI (AT-8000GS Series)