Allied-telesis AT-S94 CLI (AT-8000S Series) Instrukcja Użytkownika Pobierz pdf (Strona 327)

100

101

System Management Commands

Page 326

Example

The following example specifies the device host name.

stack master

The stack master Global Configuration mode command enables forcing the selection of a stack master. Use the

no form of this command to return to the default configuration.

Syntax

stack master unit unit

no stack master

Parameters

•

unit — Unit number of the new master (Range: 1-2)

Default Configuration

Disables forcing the selection of a stack master.

Command Mode

Global Configuration mode

User Guidelines

This command is not relevant to standalone devices.

The following algorithm is used to select a unit as the master:

• If only one master-enabled unit is in the stack (1 or 2), it becomes the master.

• If a unit configured as a forced master, it becomes the master.

If a forced master unit is removed from a stack and placed in a different stack with another forced master unit, both

are considered to be forced, and the election criteria continue as follows:

• The unit with the longer up-time is elected master. Units are considered to have the same up-time if they were

powered up within ten minutes of each other.

• If both forced master units have the same up-time, Unit 1 is elected.

Example

The following example selects Unit 2 as the stack master.

console(config)#

hostname

stack

stack(config)#

no hostname

console(config)#

stack master unit

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 401 402

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-S94 CLI (AT-8000S Series) Instrukcja Użytkownika Strona 327

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-S94 CLI (AT-8000S Series)