Allied-telesis AT-S94 CLI (AT-8000S Series) Instrukcja Użytkownika Pobierz pdf (Strona 62)

100

101

Page 61

Allied Telesis

AT-8000S-S94-3.0 Command Line Interface User’s Guide

Example

The following example adds the MAC-layer address 66:66:66:66:66:66 to port 1/e1.

show bridge address-table

The show bridge address-table Privileged EXEC mode command displays all entries in the bridge-forwarding

database.

Syntax

show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number]

Parameters

•

vlan — Specifies a valid VLAN, such as VLAN 1.

• interface — A valid Ethernet port.

• port-channel-number — A valid port-channel number.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

•

Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer 3 interface) are

presented in the VLAN column by a port number and not by a VLAN ID.

• "Special" MAC addresses that were not statically defined or dynamically learned are displayed in the MAC

Address Table.

Example

The following example displays all classes of entries in the bridge-forwarding database.

console(config)#

interface ethernet

1/e1

console(config-if)#

port security routed secure-address

66:66:66:66:66:66

console#

show bridge address-table

Aging time is 300 sec

vlan mac address Port Type

--------- -------------- ---- -------

1 00:02:3f:b4:28:05 e16 dynamic

1 00:07:40:c9:5f:83 ch5 dynamic

1 00:15:77:74:64:40 ch5 dynamic

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 401 402

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-S94 CLI (AT-8000S Series) Instrukcja Użytkownika Strona 62

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-S94 CLI (AT-8000S Series)