Allied-telesis AT-S94 CLI (AT-8000S Series) Instrukcja Użytkownika Pobierz pdf (Strona 73)

100

101

Clock Commands

Page 72

Default Configuration

No external clock source

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures an external time source for the system clock.

clock timezone

The clock timezone Global Configuration mode command sets the time zone for display purposes. Use the no

form of this command to set the time to the Coordinated Universal Time (UTC).

Syntax

clock timezone hours-offset [minutes minutes-offset] [zone acronym]

no clock timezone

Parameters

•

hours-offset — Hours difference from UTC. (Range: -12 – +13)

• minutes-offset — Minutes difference from UTC. (Range: 1 – 59)

• acronym — The acronym of the time zone. (Range: Up to 4 characters)

Default Configuration

Clock set to UTC.

Command Mode

Global Configuration mode

User Guidelines

The system internally keeps time in UTC, so this command is used only for display purposes and when the time is

manually set.

Example

The following example sets the timezone to 6 hours difference from UTC.

Console(config)# clock source sntp

Console(config)

clock timezone -6 zone CST

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 401 402

Komentarze do niniejszej Instrukcji

Brak uwag

Allied-telesis AT-S94 CLI (AT-8000S Series) Instrukcja Użytkownika Strona 73

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Allied-telesis AT-S94 CLI (AT-8000S Series)